原子系统中偶极-偶极相互作用对量子存储支撑熵不确定度的调控研究

本文研究了Markovian过程和non-Markovian过程两种情况下,原子系统中偶极-偶极(D-D)相互作用和失谐量对两原子系统量子存储支撑(QMA)熵不确定度的调控作用.与Markovian过程相比,在non-Markovian过程中,由于库环境的记忆效应使得具有D-D相互作用的两原子系统QMA熵不确定度的演化行为呈现出振荡上升现象,且熵不确定度的上升趋势得到减缓,从而抑制了由系统量子噪声引起的退相干效应.此外,D-D相互作用对两原子系统QMA熵不确定度具有显著的调控能力,且D-D相互作用比失谐量的调控能力更强.     

Experimental design approach for petrochemical waste water treatment using solar assisted photo Fenton process

In this study, the effect of photo-Fenton process on the treatment of petrochemical waste water treatment was investigated. The influence of process conditions were determined by factorial design. Optimization of the process conditions were performed by central composite design. Under, optimized conditions lab scale and solar assisted pilot scale of petrochemical waste water treatment was performed. Three factors namely initial pH, H₂O₂ concentration (mM) and Fe²⁺ concentration (mM) executed the essential role in petrochemical waste water treatment. Central composite design resulted in the prediction of optimized value as 6.5 initial pH, 15.65 mM of H₂O₂ concentration and 2.09 mM of Fe²⁺ concentration. Under these conditions, the reduction in chemical oxygen demand (COD) percentage reached about 68.67 ± 2.8% after 280 min in pilot scale of solar assisted photo Fenton process of petrochemical waste water treatment. Thus, experimental design combined with advanced Fenton process can become a feasible unconventional method for petrochemical waste water treatment.     

Solar Driven Gas Phase Advanced Oxidation Processes for Methane Removal - Challenges and Perspectives

Methane (CH₄) is a potent greenhouse gas and the second highest contributor to global warming. CH₄ emissions are still growing at an alarmingly high pace. To limit global warming to 1.5 °C, one of the most effective strategies is to reduce rapidly the CH₄ emissions by developing large-scale methane removal methods. The purpose of this perspective paper is threefold. (1) To highlight the technology gap dealing with low concentration CH₄ (at many emission sources and in the atmosphere). (2) To analyze the challenges and prospects of solar-driven gas phase advanced oxidation processes for CH₄ removal. And (3) to propose some ideas, which may help to develop solar-driven gas phase advanced oxidation processes and make them deployable at a climate significant scale.     

Dynamics of milling processes with variable time delays

A milling-process model with a variable time delay associated with each cutting tooth is presented in this article. The source of this variable time delay is the feed rate. The effect of the feed motion on the entry cutting angle, the exit cutting angle, and the amplitude of feed mark is also discussed. Loss-of-contact effects are also considered. The system dynamics is described by a set of delay differential equations with periodic coefficients and variable time delays. A semi-discretization scheme is presented for analyzing the stability of periodic orbits of this system. The analysis provides evidence of period-doubling bifurcations and secondary Hopf bifurcations. Good agreement is found between the numerical results obtained from this work and the results of related experimental studies.     

Defect assessment procedure based on ductile tearing process

Strain hardening, crack growth resistance and nonuniform load distribution have significant effects on the ductile tearing process. A defect assessment procedure incorporating with the above features is proposed in the present paper, with the final appearance of “design curves” to facilitate engineering applications.     

RESEARCH ON RELIABILITY GROWTH FOR SYNCHRONOUSLY DEVELOPED MULTI-SYSTEMS

IntroductionAMSAA model could evaluate reliability growth test for mono-system perfectly[1-8].Butfor multi-systems,especially for synchronously developed multi-systems,the model parametersneed to be estimated by developing some newmethods.AMSAA-BISE model…     

几种高分子材料的磨粒侵蚀机理

本文采用自行设计制造的磨粒侵蚀试验台对聚氨酯、丁苯橡胶、尼龙6和聚四氟乙烯4种高分子材料的磨粒侵蚀行为进行了试验研究,并且通过扫描电镜对试样磨损表面进行了观察分析,分别提出了这4种高分子材料磨粒侵蚀的物理模型和物理过程,阐明了它们的磨粒侵蚀机理:具有一定动能的固体颗粒对材料表层产生微切削;微观裂纹的萌生与扩展导致材料表层微观剥落;材料的力化学分解和热分解;材料表层局部塑性变形发展成塑性断裂而从表面脱落。     

随机扰动的同宿分岔系统研究

利用一维扩展过程的奇点理论并结合能量包络的随机平均法，考查“隐藏在余维２分岔点之后”的同宿分岔系统受参激白噪声影响的分岔行为。     

三维非均匀脆性材料破坏过程的数值模拟

采用有限元方法模拟了三维均匀固体材料在宏观等效力学性质和破坏过程。首先采用格形（lattice）方法把试件离散成三维均匀网格,在每个单元格中将材料按照均匀处理,根据给定的统计规则来确定不同单元格中的材料常数以反映材料的非均匀性。然后对非均匀脆性材料选用简单的本构关系与断裂准则,采用自适应选取载荷步长对试件进行加载,通过非平衡迭代技术对刚度矩阵进行不断修正,实现了非均匀脆性材料的弹性行为及破坏过程的数值模拟。在此基础上,通过数值计算研究了材料的非均匀分布对宏观等效力学性质和破坏过程的影响,给出了破坏全过程的非线性载荷－位移曲线以及不同载荷阶段的三维损伤破坏的演化图。